bng-test/usr/local/etc/raddb# cat users
000c.29eb.eb96          Cleartext-Password := "123"
                        ERX-Service-Activate:1 += "RATE-LIMIT(1000000)",
                        ERX-Service-Statistics:1 += time-volume,
                        ERX-Service-Volume:1 += 100


# 000c.297c.ea3f        Cleartext-Password := "123"
# spirent0              Cleartext-Password := "spirent0"
# spirent1              Cleartext-Password := "spirent1"

===

rad_recv: Access-Request packet from host 192.168.3.75 port 58658, id=52, length=270
        User-Name = "000c.29eb.eb96"
        User-Password = "123"
        Service-Type = Framed-User
        Chargeable-User-Identity = ""
        Acct-Session-Id = "14"
        Calling-Station-Id = "MX104-RE1:xe-0/0/0.1073741824:11"
        ERX-Dhcp-Options = 0x3501013204c0a800650c09667265656273642d343705011c030f06
        ERX-Dhcp-Mac-Addr = "000c.29eb.eb96"
        Framed-IP-Address = 192.168.0.101
        ERX-Interface-Desc = "-- L2 access network"
        NAS-Identifier = "MX104-RE1"
        NAS-Port = 11
        NAS-Port-Id = "xe-0/0/0.1073741824:11"
        NAS-Port-Type = Ethernet
        ERX-Pppoe-Description = "pppoe 00:0c:29:eb:eb:96"
# Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default
+group authorize {
++[preprocess] = ok
++[chap] = noop
++[mschap] = noop
++[digest] = noop
[suffix] No '@' in User-Name = "000c.29eb.eb96", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
[eap] No EAP-Message, not doing EAP
++[eap] = noop
[files] users: Matched entry 000c.29eb.eb96 at line 1
++[files] = ok
++[expiration] = noop
++[logintime] = noop
++[pap] = updated
+} # group authorize = updated
Found Auth-Type = PAP
# Executing group from file /usr/local/etc/raddb/sites-enabled/default
+group PAP {
[pap] login attempt with password "123"
[pap] Using clear text password "123"
[pap] User authenticated successfully
++[pap] = ok
+} # group PAP = ok
Login OK: [000c.29eb.eb96/123] (from client mx104-RE1 port 11 cli MX104-RE1:xe-0/0/0.1073741824:11)
# Executing section post-auth from file /usr/local/etc/raddb/sites-enabled/default
+group post-auth {
++[exec] = noop
+} # group post-auth = noop
Sending Access-Accept of id 52 to 192.168.3.75 port 58658
        ERX-Service-Activate:1 += "RATE-LIMIT(1000000)"
        ERX-Service-Statistics:1 += time-volume
        ERX-Service-Volume:1 += 100
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 192.168.3.75 port 58658, id=53, length=308
        User-Name = "000c.29eb.eb96"
        Acct-Status-Type = Start
        Acct-Session-Id = "14"
        Event-Timestamp = "Oct 23 2014 07:12:06 UTC"
        Service-Type = Framed-User
        ERX-Attr-177 = 0x506f72742053706565643a2031303030303030306b
        Acct-Authentic = RADIUS
        Acct-Delay-Time = 0
        Calling-Station-Id = "MX104-RE1:xe-0/0/0.1073741824:11"
        ERX-Dhcp-Options = 0x3501013204c0a800650c09667265656273642d343705011c030f06
        ERX-Dhcp-Mac-Addr = "000c.29eb.eb96"
        Framed-IP-Address = 192.168.0.101
        Framed-IP-Netmask = 255.255.255.0
        ERX-Interface-Desc = "-- L2 access network"
        NAS-Identifier = "MX104-RE1"
        NAS-Port = 11
        NAS-Port-Id = "xe-0/0/0.1073741824:11"
        NAS-Port-Type = Ethernet
        ERX-Pppoe-Description = "pppoe 00:0c:29:eb:eb:96"
# Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] Hashing 'NAS-Port = 11,NAS-Identifier = "MX104-RE1",NAS-IP-Address = 192.168.3.75,Acct-Session-Id = "14",User-Name = "000c.29eb.eb96"'
[acct_unique] Acct-Unique-Session-ID = "190575ece6ade950".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "000c.29eb.eb96", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
+group accounting {
[detail]        expand: %{Packet-Src-IP-Address} -> 192.168.3.75
[detail]        expand: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radacct/192.168.3.75/detail-20141023
[detail] /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radacct/192.168.3.75/detail-20141023
[detail]        expand: %t -> Thu Oct 23 11:31:33 2014
++[detail] = ok
++[exec] = noop
[attr_filter.accounting_response]       expand: %{User-Name} -> 000c.29eb.eb96
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 53 to 192.168.3.75 port 58658
Finished request 1.
Cleaning up request 1 ID 53 with timestamp +30
Going to the next request
Waking up in 4.6 seconds.
rad_recv: Accounting-Request packet from host 192.168.3.75 port 58658, id=54, length=456
        User-Name = "000c.29eb.eb96"
        Acct-Status-Type = Start
        Acct-Session-Id = "14:15-1414048326"
        Event-Timestamp = "Oct 23 2014 07:12:06 UTC"
        Service-Type = Framed-User
        Filter-Id = "IPV4-ingress:var-ff-in_UID1013-demux0.1073741831-in"
        Filter-Id = "IPV4-egress:var-ff-out_UID1014-demux0.1073741831-out"
        ERX-Attr-177 = 0x506f72742053706565643a2031303030303030306b
        Acct-Authentic = RADIUS
        Acct-Delay-Time = 0
        Calling-Station-Id = "MX104-RE1:xe-0/0/0.1073741824:11"
        ERX-Dhcp-Options = 0x3501013204c0a800650c09667265656273642d343705011c030f06
        ERX-Dhcp-Mac-Addr = "000c.29eb.eb96"
        Framed-IP-Address = 192.168.0.101
        Framed-IP-Netmask = 255.255.255.0
        ERX-Interface-Desc = "-- L2 access network"
        ERX-Service-Session = "RATE-LIMIT(1000000)"
        NAS-Identifier = "MX104-RE1"
        NAS-Port = 11
        NAS-Port-Id = "xe-0/0/0.1073741824:11"
        NAS-Port-Type = Ethernet
        ERX-Pppoe-Description = "pppoe 00:0c:29:eb:eb:96"
# Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] Hashing 'NAS-Port = 11,NAS-Identifier = "MX104-RE1",NAS-IP-Address = 192.168.3.75,Acct-Session-Id = "14:15-1414048326",User-Name = "000c.29eb.eb96"'
[acct_unique] Acct-Unique-Session-ID = "3ad722dabf2883db".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "000c.29eb.eb96", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
+group accounting {
[detail]        expand: %{Packet-Src-IP-Address} -> 192.168.3.75
[detail]        expand: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radacct/192.168.3.75/detail-20141023
[detail] /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radacct/192.168.3.75/detail-20141023
[detail]        expand: %t -> Thu Oct 23 11:31:33 2014
++[detail] = ok
++[exec] = noop
[attr_filter.accounting_response]       expand: %{User-Name} -> 000c.29eb.eb96
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 54 to 192.168.3.75 port 58658
Finished request 2.
Cleaning up request 2 ID 54 with timestamp +30
Going to the next request
Waking up in 4.6 seconds.
rad_recv: Accounting-Request packet from host 192.168.3.75 port 58658, id=55, length=446
        User-Name = "000c.29eb.eb96"
        Acct-Status-Type = Interim-Update
        Acct-Session-Id = "14"
        Event-Timestamp = "Oct 23 2014 07:12:06 UTC"
        Acct-Input-Octets = 0
        Acct-Output-Octets = 0
        Acct-Session-Time = 0
        Acct-Input-Packets = 0
        Acct-Output-Packets = 0
        Service-Type = Framed-User
        ERX-Attr-177 = 0x506f72742053706565643a2031303030303030306b
        Acct-Authentic = RADIUS
        Acct-Delay-Time = 0
        Calling-Station-Id = "MX104-RE1:xe-0/0/0.1073741824:11"
        ERX-Dhcp-Options = 0x3501013204c0a800650c09667265656273642d343705011c030f06
        ERX-Dhcp-Mac-Addr = "000c.29eb.eb96"
        Framed-IP-Address = 192.168.0.101
        Framed-IP-Netmask = 255.255.255.0
        ERX-Input-Gigapkts = 0
        Acct-Input-Gigawords = 0
        ERX-Interface-Desc = "-- L2 access network"
        NAS-Identifier = "MX104-RE1"
        NAS-Port = 11
        NAS-Port-Id = "xe-0/0/0.1073741824:11"
        NAS-Port-Type = Ethernet
        ERX-Output-Gigapkts = 0
        Acct-Output-Gigawords = 0
        ERX-IPv6-Acct-Input-Octets = 0
        ERX-IPv6-Acct-Output-Octets = 0
        ERX-IPv6-Acct-Input-Packets = 0
        ERX-IPv6-Acct-Output-Packets = 0
        ERX-IPv6-Acct-Input-Gigawords = 0
        ERX-IPv6-Acct-Output-Gigawords = 0
        ERX-Pppoe-Description = "pppoe 00:0c:29:eb:eb:96"
# Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] Hashing 'NAS-Port = 11,NAS-Identifier = "MX104-RE1",NAS-IP-Address = 192.168.3.75,Acct-Session-Id = "14",User-Name = "000c.29eb.eb96"'
[acct_unique] Acct-Unique-Session-ID = "190575ece6ade950".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "000c.29eb.eb96", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
+group accounting {
[detail]        expand: %{Packet-Src-IP-Address} -> 192.168.3.75
[detail]        expand: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radacct/192.168.3.75/detail-20141023
[detail] /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radacct/192.168.3.75/detail-20141023
[detail]        expand: %t -> Thu Oct 23 11:31:33 2014
++[detail] = ok
++[exec] = noop
[attr_filter.accounting_response]       expand: %{User-Name} -> 000c.29eb.eb96
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 55 to 192.168.3.75 port 58658
Finished request 3.
Cleaning up request 3 ID 55 with timestamp +30
Going to the next request
Waking up in 4.3 seconds.
Cleaning up request 0 ID 52 with timestamp +29
Ready to process requests.










rad_recv: Accounting-Request packet from host 192.168.3.75 port 58658, id=56, length=594
        User-Name = "000c.29eb.eb96"
        Acct-Status-Type = Interim-Update
        Acct-Session-Id = "14:15-1414048326"
        Event-Timestamp = "Oct 23 2014 07:21:46 UTC"
        Acct-Input-Octets = 59644368
        Acct-Output-Octets = 0
        Acct-Session-Time = 580
        Acct-Input-Packets = 39816
        Acct-Output-Packets = 0
        Service-Type = Framed-User
        Filter-Id = "IPV4-ingress:var-ff-in_UID1013-demux0.1073741831-in"
        Filter-Id = "IPV4-egress:var-ff-out_UID1014-demux0.1073741831-out"
        ERX-Attr-177 = 0x506f72742053706565643a2031303030303030306b
        Acct-Authentic = RADIUS
        Acct-Delay-Time = 0
        Calling-Station-Id = "MX104-RE1:xe-0/0/0.1073741824:11"
        ERX-Dhcp-Options = 0x3501013204c0a800650c09667265656273642d343705011c030f06
        ERX-Dhcp-Mac-Addr = "000c.29eb.eb96"
        Framed-IP-Address = 192.168.0.101
        Framed-IP-Netmask = 255.255.255.0
        ERX-Input-Gigapkts = 0
        Acct-Input-Gigawords = 0
        ERX-Interface-Desc = "-- L2 access network"
        ERX-Service-Session = "RATE-LIMIT(1000000)"
        NAS-Identifier = "MX104-RE1"
        NAS-Port = 11
        NAS-Port-Id = "xe-0/0/0.1073741824:11"
        NAS-Port-Type = Ethernet
        ERX-Output-Gigapkts = 0
        Acct-Output-Gigawords = 0
        ERX-IPv6-Acct-Input-Octets = 0
        ERX-IPv6-Acct-Output-Octets = 0
        ERX-IPv6-Acct-Input-Packets = 0
        ERX-IPv6-Acct-Output-Packets = 0
        ERX-IPv6-Acct-Input-Gigawords = 0
        ERX-IPv6-Acct-Output-Gigawords = 0
        ERX-Pppoe-Description = "pppoe 00:0c:29:eb:eb:96"
# Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] Hashing 'NAS-Port = 11,NAS-Identifier = "MX104-RE1",NAS-IP-Address = 192.168.3.75,Acct-Session-Id = "14:15-1414048326",User-Name = "000c.29eb.eb96"'
[acct_unique] Acct-Unique-Session-ID = "3ad722dabf2883db".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "000c.29eb.eb96", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
+group accounting {
[detail]        expand: %{Packet-Src-IP-Address} -> 192.168.3.75
[detail]        expand: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radacct/192.168.3.75/detail-20141023
[detail] /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radacct/192.168.3.75/detail-20141023
[detail]        expand: %t -> Thu Oct 23 11:41:13 2014
++[detail] = ok
++[exec] = noop
[attr_filter.accounting_response]       expand: %{User-Name} -> 000c.29eb.eb96
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 56 to 192.168.3.75 port 58658
Finished request 4.
Cleaning up request 4 ID 56 with timestamp +610
Going to the next request
Ready to process requests.
rad_recv: Accounting-Request packet from host 192.168.3.75 port 58658, id=57, length=446
        User-Name = "000c.29eb.eb96"
        Acct-Status-Type = Interim-Update
        Acct-Session-Id = "14"
        Event-Timestamp = "Oct 23 2014 07:22:00 UTC"
        Acct-Input-Octets = 61383546
        Acct-Output-Octets = 0
        Acct-Session-Time = 594
        Acct-Input-Packets = 40977
        Acct-Output-Packets = 0
        Service-Type = Framed-User
        ERX-Attr-177 = 0x506f72742053706565643a2031303030303030306b
        Acct-Authentic = RADIUS
        Acct-Delay-Time = 0
        Calling-Station-Id = "MX104-RE1:xe-0/0/0.1073741824:11"
        ERX-Dhcp-Options = 0x3501013204c0a800650c09667265656273642d343705011c030f06
        ERX-Dhcp-Mac-Addr = "000c.29eb.eb96"
        Framed-IP-Address = 192.168.0.101
        Framed-IP-Netmask = 255.255.255.0
        ERX-Input-Gigapkts = 0
        Acct-Input-Gigawords = 0
        ERX-Interface-Desc = "-- L2 access network"
        NAS-Identifier = "MX104-RE1"
        NAS-Port = 11
        NAS-Port-Id = "xe-0/0/0.1073741824:11"
        NAS-Port-Type = Ethernet
        ERX-Output-Gigapkts = 0
        Acct-Output-Gigawords = 0
        ERX-IPv6-Acct-Input-Octets = 0
        ERX-IPv6-Acct-Output-Octets = 0
        ERX-IPv6-Acct-Input-Packets = 0
        ERX-IPv6-Acct-Output-Packets = 0
        ERX-IPv6-Acct-Input-Gigawords = 0
        ERX-IPv6-Acct-Output-Gigawords = 0
        ERX-Pppoe-Description = "pppoe 00:0c:29:eb:eb:96"
# Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] Hashing 'NAS-Port = 11,NAS-Identifier = "MX104-RE1",NAS-IP-Address = 192.168.3.75,Acct-Session-Id = "14",User-Name = "000c.29eb.eb96"'
[acct_unique] Acct-Unique-Session-ID = "190575ece6ade950".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "000c.29eb.eb96", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
+group accounting {
[detail]        expand: %{Packet-Src-IP-Address} -> 192.168.3.75
[detail]        expand: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radacct/192.168.3.75/detail-20141023
[detail] /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radacct/192.168.3.75/detail-20141023
[detail]        expand: %t -> Thu Oct 23 11:41:27 2014
++[detail] = ok
++[exec] = noop
[attr_filter.accounting_response]       expand: %{User-Name} -> 000c.29eb.eb96
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 57 to 192.168.3.75 port 58658
Finished request 5.
Cleaning up request 5 ID 57 with timestamp +624
Going to the next request
Ready to process requests.









rad_recv: Accounting-Request packet from host 192.168.3.75 port 58658, id=58, length=594
        User-Name = "000c.29eb.eb96"
        Acct-Status-Type = Interim-Update
        Acct-Session-Id = "14:15-1414048326"
        Event-Timestamp = "Oct 23 2014 07:31:46 UTC"
        Acct-Input-Octets = 134707650
        Acct-Output-Octets = 0
        Acct-Session-Time = 1180
        Acct-Input-Packets = 89925
        Acct-Output-Packets = 0
        Service-Type = Framed-User
        Filter-Id = "IPV4-ingress:var-ff-in_UID1013-demux0.1073741831-in"
        Filter-Id = "IPV4-egress:var-ff-out_UID1014-demux0.1073741831-out"
        ERX-Attr-177 = 0x506f72742053706565643a2031303030303030306b
        Acct-Authentic = RADIUS
        Acct-Delay-Time = 0
        Calling-Station-Id = "MX104-RE1:xe-0/0/0.1073741824:11"
        ERX-Dhcp-Options = 0x3501013204c0a800650c09667265656273642d343705011c030f06
        ERX-Dhcp-Mac-Addr = "000c.29eb.eb96"
        Framed-IP-Address = 192.168.0.101
        Framed-IP-Netmask = 255.255.255.0
        ERX-Input-Gigapkts = 0
        Acct-Input-Gigawords = 0
        ERX-Interface-Desc = "-- L2 access network"
        ERX-Service-Session = "RATE-LIMIT(1000000)"
        NAS-Identifier = "MX104-RE1"
        NAS-Port = 11
        NAS-Port-Id = "xe-0/0/0.1073741824:11"
        NAS-Port-Type = Ethernet
        ERX-Output-Gigapkts = 0
        Acct-Output-Gigawords = 0
        ERX-IPv6-Acct-Input-Octets = 0
        ERX-IPv6-Acct-Output-Octets = 0
        ERX-IPv6-Acct-Input-Packets = 0
        ERX-IPv6-Acct-Output-Packets = 0
        ERX-IPv6-Acct-Input-Gigawords = 0
        ERX-IPv6-Acct-Output-Gigawords = 0
        ERX-Pppoe-Description = "pppoe 00:0c:29:eb:eb:96"
# Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] Hashing 'NAS-Port = 11,NAS-Identifier = "MX104-RE1",NAS-IP-Address = 192.168.3.75,Acct-Session-Id = "14:15-1414048326",User-Name = "000c.29eb.eb96"'
[acct_unique] Acct-Unique-Session-ID = "3ad722dabf2883db".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "000c.29eb.eb96", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
+group accounting {
[detail]        expand: %{Packet-Src-IP-Address} -> 192.168.3.75
[detail]        expand: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radacct/192.168.3.75/detail-20141023
[detail] /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radacct/192.168.3.75/detail-20141023
[detail]        expand: %t -> Thu Oct 23 11:51:13 2014
++[detail] = ok
++[exec] = noop
[attr_filter.accounting_response]       expand: %{User-Name} -> 000c.29eb.eb96
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 58 to 192.168.3.75 port 58658
Finished request 6.
Cleaning up request 6 ID 58 with timestamp +1210
Going to the next request
Ready to process requests.
rad_recv: Accounting-Request packet from host 192.168.3.75 port 58658, id=59, length=600
        User-Name = "000c.29eb.eb96"
        Acct-Status-Type = Stop
        Acct-Session-Id = "14:15-1414048326"
        Event-Timestamp = "Oct 23 2014 07:31:46 UTC"
        Acct-Input-Octets = 134707650
        Acct-Output-Octets = 0
        Acct-Session-Time = 1180
        Acct-Input-Packets = 89925
        Acct-Output-Packets = 0
        Acct-Terminate-Cause = Admin-Reset
        Service-Type = Framed-User
        Filter-Id = "IPV4-ingress:var-ff-in_UID1013-demux0.1073741831-in"
        Filter-Id = "IPV4-egress:var-ff-out_UID1014-demux0.1073741831-out"
        ERX-Attr-177 = 0x506f72742053706565643a2031303030303030306b
        Acct-Authentic = RADIUS
        Acct-Delay-Time = 0
        Calling-Station-Id = "MX104-RE1:xe-0/0/0.1073741824:11"
        ERX-Dhcp-Options = 0x3501013204c0a800650c09667265656273642d343705011c030f06
        ERX-Dhcp-Mac-Addr = "000c.29eb.eb96"
        Framed-IP-Address = 192.168.0.101
        Framed-IP-Netmask = 255.255.255.0
        ERX-Input-Gigapkts = 0
        Acct-Input-Gigawords = 0
        ERX-Interface-Desc = "-- L2 access network"
        ERX-Service-Session = "RATE-LIMIT(1000000)"
        NAS-Identifier = "MX104-RE1"
        NAS-Port = 11
        NAS-Port-Id = "xe-0/0/0.1073741824:11"
        NAS-Port-Type = Ethernet
        ERX-Output-Gigapkts = 0
        Acct-Output-Gigawords = 0
        ERX-IPv6-Acct-Input-Octets = 0
        ERX-IPv6-Acct-Output-Octets = 0
        ERX-IPv6-Acct-Input-Packets = 0
        ERX-IPv6-Acct-Output-Packets = 0
        ERX-IPv6-Acct-Input-Gigawords = 0
        ERX-IPv6-Acct-Output-Gigawords = 0
        ERX-Pppoe-Description = "pppoe 00:0c:29:eb:eb:96"
# Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] Hashing 'NAS-Port = 11,NAS-Identifier = "MX104-RE1",NAS-IP-Address = 192.168.3.75,Acct-Session-Id = "14:15-1414048326",User-Name = "000c.29eb.eb96"'
[acct_unique] Acct-Unique-Session-ID = "3ad722dabf2883db".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "000c.29eb.eb96", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
+group accounting {
[detail]        expand: %{Packet-Src-IP-Address} -> 192.168.3.75
[detail]        expand: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radacct/192.168.3.75/detail-20141023
[detail] /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radacct/192.168.3.75/detail-20141023
[detail]        expand: %t -> Thu Oct 23 11:51:13 2014
++[detail] = ok
++[exec] = noop
[attr_filter.accounting_response]       expand: %{User-Name} -> 000c.29eb.eb96
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 59 to 192.168.3.75 port 58658
Finished request 7.
Cleaning up request 7 ID 59 with timestamp +1210
Going to the next request
Ready to process requests.
rad_recv: Accounting-Request packet from host 192.168.3.75 port 58658, id=60, length=446
        User-Name = "000c.29eb.eb96"
        Acct-Status-Type = Interim-Update
        Acct-Session-Id = "14"
        Event-Timestamp = "Oct 23 2014 07:32:00 UTC"
        Acct-Input-Octets = 136813838
        Acct-Output-Octets = 0
        Acct-Session-Time = 1194
        Acct-Input-Packets = 91331
        Acct-Output-Packets = 0
        Service-Type = Framed-User
        ERX-Attr-177 = 0x506f72742053706565643a2031303030303030306b
        Acct-Authentic = RADIUS
        Acct-Delay-Time = 0
        Calling-Station-Id = "MX104-RE1:xe-0/0/0.1073741824:11"
        ERX-Dhcp-Options = 0x3501013204c0a800650c09667265656273642d343705011c030f06
        ERX-Dhcp-Mac-Addr = "000c.29eb.eb96"
        Framed-IP-Address = 192.168.0.101
        Framed-IP-Netmask = 255.255.255.0
        ERX-Input-Gigapkts = 0
        Acct-Input-Gigawords = 0
        ERX-Interface-Desc = "-- L2 access network"
        NAS-Identifier = "MX104-RE1"
        NAS-Port = 11
        NAS-Port-Id = "xe-0/0/0.1073741824:11"
        NAS-Port-Type = Ethernet
        ERX-Output-Gigapkts = 0
        Acct-Output-Gigawords = 0
        ERX-IPv6-Acct-Input-Octets = 0
        ERX-IPv6-Acct-Output-Octets = 0
        ERX-IPv6-Acct-Input-Packets = 0
        ERX-IPv6-Acct-Output-Packets = 0
        ERX-IPv6-Acct-Input-Gigawords = 0
        ERX-IPv6-Acct-Output-Gigawords = 0
        ERX-Pppoe-Description = "pppoe 00:0c:29:eb:eb:96"
# Executing section preacct from file /usr/local/etc/raddb/sites-enabled/default
+group preacct {
++[preprocess] = ok
[acct_unique] Hashing 'NAS-Port = 11,NAS-Identifier = "MX104-RE1",NAS-IP-Address = 192.168.3.75,Acct-Session-Id = "14",User-Name = "000c.29eb.eb96"'
[acct_unique] Acct-Unique-Session-ID = "190575ece6ade950".
++[acct_unique] = ok
[suffix] No '@' in User-Name = "000c.29eb.eb96", looking up realm NULL
[suffix] No such realm "NULL"
++[suffix] = noop
++[files] = noop
+} # group preacct = ok
# Executing section accounting from file /usr/local/etc/raddb/sites-enabled/default
+group accounting {
[detail]        expand: %{Packet-Src-IP-Address} -> 192.168.3.75
[detail]        expand: /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d -> /var/log/radacct/192.168.3.75/detail-20141023
[detail] /var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radacct/192.168.3.75/detail-20141023
[detail]        expand: %t -> Thu Oct 23 11:51:27 2014
++[detail] = ok
++[exec] = noop
[attr_filter.accounting_response]       expand: %{User-Name} -> 000c.29eb.eb96
attr_filter: Matched entry DEFAULT at line 12
++[attr_filter.accounting_response] = updated
+} # group accounting = updated
Sending Accounting-Response of id 60 to 192.168.3.75 port 58658
Finished request 8.
Cleaning up request 8 ID 60 with timestamp +1224
Going to the next request
Ready to process requests.
